TS 410 (Stihl 2-MIX) 300mm petrol disc cutter.
Diamond blades sold separately (see below for range of options).
Compact and robust, the Stihl TS410. Long-life filter system with cyclone pre-separation makes on site maintenance unnecessary. Extremely low vibration levels (3.9m/s²). High performance engine with stratified charge system. Compact design and optimised balance for excellent cutting and guide characteristics. For use with 300mm cutting wheel. ElastoStart, primer pump and decompression valve. Bayonet filler cap for tool free opening. Can be hand held or used with the FW 20 cart. Supplied with abrasive cutting wheel.
Any questions? Need assistance? Call our helpline on 01603 756128
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Water is supplied to the cutting wheel through the standard water connection with sprinkler system to suppress the dust produced during cutting. It is supplied to the device in such a way so as not to interfere with your work.
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.
Light, consistent re-tensioning increases the service life of the belts and shaft bearings.
|Vibration value, right m/s2 1)||3.9|
|Sound pressure level dB(A) 2)||98|
|Sound power level dB(A) 2)||109|
|Vibration value, left m/s2 1)||3.9|
|Tank volume l||0.71|
|Sound pressure level dB(A) 3)||98.0|
|Sound power level dB(A) 3)||109.0|
|Vibration levels left/right m/s² 4)||3.9/3.9|
|Cutting wheel mm/in||300 / 12|
The engine requires a mix of petrol and engine oil. Simply mix a Stihl 50:1 two-stroke engine oil with unleaded (95 octane) petrol. The simplest method is using a standard 5 litre fuel canister and to add 0.1 litres (100 ml) of Stihl HP 2 stroke oil, close and thoroughly shake the canister and the mix is ready to use.
For this machine we recommend either Stihl HP, HP Ultra or HP Super engine oil.
£58.99 inc VAT
(£49.16 ex VAT)
£162.49 inc VAT
(£135.41 ex VAT)
£112.99 inc VAT
(£94.16 ex VAT)
£47.99 inc VAT
(£39.99 ex VAT)
£2.19 inc VAT
(£1.83 ex VAT)