Free delivery over £75 
01603 756128 
Stihl – MS 151 C-E – Petrol Chainsaw
MS151CE (Stihl 2-MIX) 1.5hp petrol chainsaw with 10/12″ bar.
The lightest back handle saw by STIHL.
This upgraded version of the MS 151 features a new 2-MIX engine that consists of a new cylinder, piston and exhaust. These changes mean there is an increase in power of the saw by up to 1.05kW and a 15% increase in torque to 1.1Nm – all while retaining the lightweight nature of the saw.
Fitted with a manual fuel pump and STIHL’s ErgoStart (E) technology, this saw is easy to start-up so you can get on with the job straight away.
Available with either a 10″ or 12″ bar and fitted with a 1/4″ PM3 saw chain for a finer, precise cut.
Any questions? Need assistance? Call our helpline on 01603 756128
Product Details
Standard Features
STIHL ErgoStart (E)
A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.
STIHL 2-MIX-Engine
1-in-4 channel technology. The economical STIHL 2-MIX engine with 1-in-4channel technology features a high torque over a wide speed range. The chainsaw provides fuel savings of up to 20% compared to STIHL two-stroke engines in the same performance class without 2-MIX technology. Exhaust emissions are reduced by up to 50%.
Side Chain Tensioner
The tensioning screw can be found on the side of the chain saw through the sprocket cover. This removes the need for contact with the sharp saw chain.
Tool Free Filler Caps
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
Service-Friendly Air Filter System
The carburetor can be accessed without tools, so you can clean the air filter in a single step.
Anti-Vibration System
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Advanced Combustion Technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Ematic Chain Lubrication System
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50%.
| Displacement cm³ | 23.6 |
| Power output kW/bhp | 1.1/1.5 |
| Weight kg 1) | 2.8 |
| Power-to-weight ratio kg/kW | 2.5 |
| System weight kg 2) | 3.12 / 3.17 |
| CO2 g/kWh | 969 |
| Sound pressure level dB(A) 3) | 96 |
| Sound power level dB(A) 3) | 110 |
| Vibration values left/right m/s² 4) | 4.9/4.9 |
| Tank volume l | 0.20 |
| Bumper spike | No bumper spike |
| Sprocket - number of teeth | 8 Z |
| Cylinder | 4 channel / chrome |
| Oil pump | Not adjustable |
| Filter | Standard filter |
| Sprocket | Sprocket profile |
| Chain tensioning | Side chain tension |
| Anti vibration system | AV system, steel spring |
| Filler cap | Tool-free filler cap |
| Chain pitch | 1/4"P |
| Starting system | Recoilless ignition / Manual fuel pump / ErgoStart / Standard starter handle |
| EPA Certified fuel consumption l/h | 0.507 |
| Oil tank volume cm3 | 150 |
- Without fuel, without bar and chain
- Unfueled, with guide bar and saw chain
- K-factor according to DIR 2006/42/EC = 2.5 dB (A)
- K-factor according to DIR 2006/42/EC = 2m / s ²
The engine requires a mix of petrol and engine oil. Simply mix a Stihl 50:1 two-stroke engine oil with unleaded (95 octane) petrol. The simplest method is using a standard 5 litre fuel canister and to add 0.1 litres (100 ml) of Stihl HP 2 stroke oil, close and thoroughly shake the canister and the mix is ready to use.
For this machine we recommend either Stihl HP or Stihl HP Ultra engine oil.
Go to checkout