Free delivery over £75 
01603 756128 
Stihl – FS 70 RC-E – Petrol Brushcutter
SKU: 41442000203
£365.99 inc VAT/£304.99 ex VAT
FS 70 RC-E (Stihl 2-MIX) 1.2hp petrol brushcutter.
This machine is supplied with a standard Autocut mowing head.
Extremely robust 0.9 kW petrol brushcutter with loop handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.
Any questions? Need assistance? Call our helpline on 01603 756128
Product Details
Standard Features
Reduced-Emission Engine Technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual Fuel Pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simplified Starting System
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Loop Handle (R)
The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
Multi-Function Control Handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Basic Harness
For use with loop handle machines.
| Power output hp | 1.2 |
| Performance kW | 0.9 |
| Displacement cm3 | 27.2 |
| Weight kg 1) | 4.8 |
| Sound pressure level with metal tool dB(A) 2) | 94 |
| Sound pressure level with plastic tool dB(A) 2) | 94 |
| Sound power level with metal tool dB(A) 2) | 107 |
| Sound power level dB(A) 2) | 108 |
| Vibration value, right with plastic tool m/s2 3) | 6 |
| Vibration value, left with plastic tool m/s2 3) | 7.6 |
| Vibration value, left with metal tool m/s2 3) | 6.6 |
| Vibration value, right with metal tool m/s2 3) | 6.6 |
| Total length cm 4) | 170 |
| Cutting diameter mm | 420 |
| Tank volume l | 0.34 |
| Displacement cm³ | 27.2 |
| Power output kW/bhp | 0.9/1.2 |
| Weight kg 5) | 4.8 |
| Standard cutting tool | AutoCut C 25-2 |
- Without fuel, cutting tool and without protection
- K-factor according to DIR 2006/42/EC = 2.5 dB (A)
- K-factor according to DIR 2006/42/EC = 2m / s ²
- Without cutting tool
- Without cutting tool and deflector
Fuel - The engine requires a mix of petrol and engine oil. Simply mix a Stihl 50:1 two-stroke engine oil with unleaded (95 octane) petrol. The simplest method is using a standard 5 litre fuel canister and to add 0.1 litres (100 ml) of Stihl HP 2 stroke oil, close and thoroughly shake the canister and the mix is ready to use.
For this machine we recommend either Stihl HP or Stihl HP Ultra engine oil.
Go to checkout