£331.99 inc VAT/£276.66 ex VAT
FS 56 RC-E (Stihl 2-MIX) 1.1hp petrol brushcutter.
This machine is supplied with a standard Autocut C mowing head.
Light-weight petrol brushcutter with straight shaft, loop handle and ErgoStart. Modern appearance, convenient operation and very simple starting procedure are the highlights of the new generation STIHL grass trimmer range. The number of steps needed to start the machine has been drastically reduced. The frustration of a flooded engine is virtually eliminated. New 2-stroke engine with stratified charge allows fast acceleration, low emissions, reduced fuel consumption.Comes standard with fully adjustable loop handle and AutoCut mowing head.
Any questions? Need assistance? Call our helpline on 01603 756128
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
For use with loop handle machines.
|Power output hp||1.1|
|Weight kg 1)||4.8|
|Sound pressure level with metal tool dB(A) 2)||94|
|Sound pressure level with plastic tool dB(A) 2)||93|
|Sound power level with metal tool dB(A) 2)||107|
|Sound power level dB(A) 2)||108|
|Vibration value, right with plastic tool m/s2 3)||7.5|
|Vibration value, left with plastic tool m/s2 3)||6.5|
|Vibration value, left with metal tool m/s2 3)||6.6|
|Vibration value, right with metal tool m/s2 3)||6.6|
|Total length cm 4)||170|
|Cutting diameter mm||420|
|Tank volume l||0.34|
|Power output kW/bhp||0.8/1.1|
|Weight kg 5)||4.8|
|Standard cutting tool||AutoCut C 25-2|
Fuel - The engine requires a mix of petrol and engine oil. Simply mix a Stihl 50:1 two-stroke engine oil with unleaded (95 octane) petrol. The simplest method is using a standard 5 litre fuel canister and to add 0.1 litres (100 ml) of Stihl HP 2 stroke oil, close and thoroughly shake the canister and the mix is ready to use.
For this machine we recommend either Stihl HP or Stihl HP Ultra engine oil.
£73.49 inc VAT
(£61.24 ex VAT)
£79.49 inc VAT
(£66.24 ex VAT)
£62.19 inc VAT
(£51.83 ex VAT)
£57.79 inc VAT
(£48.16 ex VAT)