Stihl – FS 56 C-E – Petrol Brushcutter

SKU: 41442000196

£359.99 inc VAT/£299.99 ex VAT

FREE delivery to UK mainland

FS 56 C-E (Stihl 2-MIX) 1.1hp petrol brushcutter.

This machine is supplied with a standard Autocut C mowing head.

New generation, light-weight petrol brushcutter with straight shaft, bike handle and ErgoStart.

Modern appearance, convenient operation and very simple starting procedure are the highlights of the new generation STIHL grass trimmer range. The number of steps needed to start the machine has been drastically reduced. The frustration of a flooded engine is virtually eliminated. New 2-stroke engine with stratified charge allows fast acceleration, low emissions, reduced fuel consumption. Comes standard with fully adjustable bike handle and AutoCut line head.

Any questions? Need assistance? Call our helpline on 01603 756128

Product Details

Standard Features

Reduced-Emission Engine Technology

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

Manual Fuel Pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

STIHL ErgoStart (E)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

Simplified Starting System

Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

Bike Handle

When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

Basic Harness

For use with loop handle machines.

 

Power output hp 1.1
Performance kW 0.8
Displacement cm3 27.2
Weight kg 1) 5.2
Sound pressure level with metal tool dB(A) 2) 94
Sound pressure level with plastic tool dB(A) 2) 93
Sound power level with metal tool dB(A) 2) 107
Sound power level dB(A) 2) 108
Vibration value, right with plastic tool m/s2 3) 3.8
Vibration value, left with plastic tool m/s2 3) 4.7
Vibration value, left with metal tool m/s2 3) 5.5
Vibration value, right with metal tool m/s2 3) 5.5
Total length cm 4) 170
Cutting diameter mm 420
Tank volume l 0.34
Displacement cm³ 27.2
Power output kW/bhp 0.8/1.1
Weight kg 5) 5.2
Standard cutting tool AutoCut C 25-2
  1. Without fuel, cutting tool and without protection
  2. K-factor according to DIR 2006/42/EC = 2.5 dB (A)
  3. K-factor according to DIR 2006/42/EC = 2m / s ²
  4. Without cutting tool 5) without cutting tool and deflector

Fuel - The engine requires a mix of petrol and engine oil.  Simply mix a Stihl 50:1 two-stroke engine oil with unleaded (95 octane) petrol.  The simplest method is using a standard 5 litre fuel canister and to add 0.1 litres (100 ml) of Stihl HP 2 stroke oil, close and thoroughly shake the canister and the mix is ready to use.

For this machine we recommend either Stihl HP or Stihl HP Ultra engine oil.

Related Products